Showing posts with label Corset. Show all posts
Showing posts with label Corset. Show all posts

A Mid-19th Century Shaped Seam Corset

5-1-2010
I have been getting ready to make a new corset for Civil War reenacting for the past few months and at last have decided I just need to make it! This is my sixth reenacting corset that I've made for myself (I have made a few others for other folks) but for some reason I always have difficulties rememering how to construct it. For that reason I decided to do a step by step documentary on how to make one of these things.
Corsets are the foundation that almost every woman needs for a proper 1860's impression. There are a very few cases where not wearing a corset may be permissible but for the vast majority of the time a corset or stay would have been worn. A corset is meant to firm and shape the torso into a predictable shape so that highly fitted dresses can be worn over the top. A corset also takes the weight of your voluminous petticoats and skirts and evenly distrubutes that. A corset also lifts and supports the bosom so one does not flop unattractively around. :)

A corset is really not a hard garment to make. In fact, I think they are very simple to construct and only require a good fitting pattern and precise cutting and sewing. In the past I have used Period Impressions Light French Corset pattern, a drafted pattern of my own and the Laughing Moon Victorian Corset pattern. I currently use the LM pattern because it is very easy to fit, following the fitting instructions given in the pattern and makes a good shape. (There are two styles given in the LM pattern; one for a gusseted corset and the other for a gored or shaped seam corset. Both give a similar shape if fitted properly and I personally prefer the shaped seam corset for ease in fitting).
The first step in constructing a corset is to make a mock up of the pattern you are using out of old jeans or a similar weight material. Fit the corset. Once you have fitted it, trace out the fitted pattern onto fresh paper for future use. Here is my pattern, fitted from the LM Dore pattern, pinned onto the fabric I'm using for my corset:
I am using a heavy weight cotton twill fabric in a slate blue color. I have 5 pattern pieces per side of the corset so need to cut 4 of each pattern piece from the fabric. This gives me a double layer corset and the bones will be inserted into channels sewn between the outer and inner layer. You can also make single layer corsets and sew in the boning channels on the inside for a lighter and cooler corset (I have made corsets both ways) but for ease of construction and sturdiness I like the double layer. Here are all the pieces cut out and stacked for one side; repeat this procedure of cutting and stacking for the opposite side of the corset.Inserting the Busk:

I like to get the busk out of the way next. This busk is recycled from my corset two corsets ago that I used when I was pregnant. It had a belly curve to it so I put it under our mattress and had David sleep on it for about a month or so to get it flat again. :) You will need your 4 center front pieces to insert the busk.
Lay your center front pieces right sides together to make two center front sections, each a mirror image of the other. On one side, align the looped edge of the busk with the straight raw edges. My busk is a little shorter than my center front corset length but that is all right. Just position it so that it is a bit down from the top edge and a bit up from the bottom edge. This will give you room to sew on your corset binding without a breaking a machine needle on the steel! Once you have aligned the looped edge with the straight front edge and positioned it how you want it, mark each loop on the outer edges with a marking pencil. Sew your front corset pieces together, right sides together for both sides. On the corset pieces you marked for the looped part of the busk, do not sew in the short areas where the loops will be inserted. Start and stop your stitching at the marks you made. On the other side, simply sew both pieces together, all the way down. Your finished sewn pieces should look like this:
Press both seams open, turn pieces right sides out and again carefully press, the seam being on the exact edge. Carefully slide the looped edge of the busk between the corset pieces you marked for the looped edge. The loops should fit into the areas you left open in this seam. It should now look like this: For the other half of the front corset, align the looped piece with the other piece, matching top and bottom edges. The loops will overlap onto the other side, showing you where the pegs on the other half of the busk needs to be. Use a marking pencil and mark these spots.
Using a knitting needle or awl, carefully work the marked spots open, strectching the fabric and not tearing threads (if possible). Slide the busk back into position and carefully work each peg through the hole, stretching the hole to fit over the peg. Once you are done, your pieces should look like this: To keep your busk from shifting around, use a zipper foot and closely sew around the busk, going slowly since you don't want to hit your needle on the steel by mistake! Sewing the Rest of the Corset Shell:

The technique I use to sew the rest of the corset shell is one that I really love to use! It sews all four layers together using just one seam and covers all seam allowances at the same time, making the inside of the corset look the same as the outside! No seperate making up of the lining and outer layer and deplorable "stitching in the ditch" to attach the layers together!
To do this, working with just one half of the corset, take the side front pieces of your corset. Right sides together, place the side front corset piece against your center front piece. Make sure all edges match and are even. Now take the other side front piece (what will be the inside layer) and lay that, right sides together, with the center front piece. You will have a "sandwich" of side front piece, center front pieces, side front piece.
Sew all these pieces together. Trim seam allowances, clip curves and turn the side front pieces to the outside. You have a very neatly enclosed seam and are ready to sew on the side piece! Repeat this procedure for the remaining pieces and then repeat all over again for the other half of the corset. Here is what the corset looks with all pieces sewn together and with the busk hooked closed in the front: When you come to the back edges you will have raw edges left to finish. Turn each seam allowance to the inside on your center back pieces, align the folded edges and topstitch close the fold to finish off the back opening.
Mark your eyelet holes now. Make sure you mark them far enough in from the center back edge to accomodate a bone directly against the edge. (I put my eyelets about 1" - 1.5" in from the center back edge). Work your eyelets by hand or insert grommets. I have bad problems with grommets falling out so I always make handmade eyelets instead. It is a bit more time consuming to do but they wear like iron! To do so, simply poke the eyelet open with a knitting needle or awl, work it open with a pencil, trying to stretch (not tear) the fabric, and go around the hole with a closely spaced whip stitch. Here is the corset back with the eyelets worked:
Sewing the Boning Channels:

Once your eyelets are in it is time to sew the boning channels! Boning placement is really a very personal thing and you need to do what is best for your figure but generally I always place a bone along the outside edge of the corset back, and one again on the other side of the eyelets. If you are small figured then one bone along each seam line may work for you. I usually put a bone along each seam and then an extra down the middle of any wider pieces so that the finished bones are no farther apart than 2.5" or so.

Once the boning channels are sewn (make them as wide as your bone, plus a bit extra), it is time to insert the boning. You can use steel boning and I have also sucessfully used cable ties as well. I haven't reached the point of inserting boning yet with this corset so I am still not sure if I will use cable ties or spring steels. Spring steels are a post-war invention and they really don't provide much support. Flat steels are better but I do not have enough of the right length on hand to use for this corset. I may just use cable ties since I can cut them to length and if, in the future, I want to upgrade to steels I can unpick my binding and put new bones in at that time.
Next post - finishing the corset!
Love,
Sarah

5-7-2010

Well, since my last post I have finished my corset! Yay! I didn't think I would get it done so soon but a little work each evening goes a long way towards getting something done.
I decided to use cable ties for my boning since that is what I had on hand. To pick up where I left off. . .

Inserting the Boning:

Stitch your boning channels. For this corset, I used one bone along each seam and a bone at each ceneter back edge and another on the other side of the eyelets. To sew channels next to a seam, I marked the placement of the bones on the side of the seam that did NOT have the seam allowance in it. Here is a photo of one half of the corset with the boning channels sewn:Next, you need to cut your boning to the correct length. This is usually 1" shorter than the actual channel, which gives you a 1/2" seam allowance at the top and bottom to put on the binding. You *can* sew through plastic boning but most definitely *not* through steel. If you are using steel bones, they should already be the correct length since you measured each channel and ordered the right lengths, right? :) If you are using cable ties, make sure to round each edge off with a filing board to smooth the sharp corners away.If you don't do this, the bones may poke you in uncomfortable places at inconvenient times. (Voice of Experience).

Slide the bones into the proper channels. Here is a photo of the corset with all the bones slid into position:
Binding the Corset:

Horaay! The corset is nearly complete! The last thing to do is to bind the corset. This encloses the top and bottom edge of the corset to finish off all the raw edges. You can use a fabric that matches your corset fabric, or a contrasting fabric. A lighterweight fabric is best since using the actual corset fabric may result in a bulky binding that will give you "corset lines" when worn beneath a fitted dress.
I am using white Kona cotton for my binding. Cut bias strips from scraps, enough to bind the top and bottom edge. You may have to piece your bias strips together to make them long enough but that is fine.
Right sides together, pin a bias strip to each raw edge of the corset. Sew to the corset, using a 1/2" seam. Turn under the seam allowance on the long, raw edge of the binding.Turn the binding to the inside of the corset and pin along the seam line. Slip stitch binding to inside
seam line to finish corset. Here is a photo of my corset with the binding on:
I have not taken a photo yet, but I did sew some white lace to the top of the corset. This is not only decorative but also practical. It tells you which side is "up" on your corset since sometimes it is hard to know! If you haven't done so already, thread your lacing cords through the eyelets and try your new corset on! I like to use 2 laces; one coming from the top of the corset to the waist, and the other coming from the bottom of the corset to the waist. This gives me a lot more control over my waistline than using just one long lace from top to bottom.
Pictures of the corset being worn to come. . .

18th Century Stays

January 1, 2010

Wow, it is going to be hard to get used to typing "2010" as the year now that January has begun. At any rate, today is the first day of the year and I am resolved to make these stays within the year - hopefully within the month - and feel accomplished about that.

To begin with, I have wanted to make 18th century stays for a long time. As in, since I was thirteen or fourteen years old. (I am now twenty-three). A few years ago my parents got me the J.P. Ryan 18th C Strapless Stays pattern as well as the 18th C Basic Wardrobe pattern but beyond making up a linen canvas interior, as a mock up, I never made the stays. I was a little overwhelmed by the sheer amount of work that making stays seemed to entail. The tiny channels, the use of so much boning. Plus I had no event or reason to make or wear 18th century stays beyond my own personal satisfaction so I didn't really feel the need to get any done.

Lately though, I have been madly renewing my interest in 18th century fashion, particularly the last quarter of the 18th century. I like to dress historical for every day wear now so making these stays would not be impractical since I can use them for every day wear. Plus I want to make a Caraco jacket and petticoat and stays will provide the proper foundation!

Thus, this being decided, I set off on a quest to read about how to make an accurate pair of stays from this time period. I am really starting from nothing with this era. I have very little prior knowledge of any construction techniques or cut, or style. It is all pretty new to me but I am so thankful for so many other costumers who have shared a lot of information about constructing these kind of stays. Sites that hugely helped me (and are continuing to educate me as I reference them all the time) are these:





There is also a fabulous blog dedicated to all things 18th century stays but I can't seem to find the link to it right now. . .I will update the link as soon as I come across it again.
Stage 1: The Style

As I researched more, I found out that there is an option to the fully boned stays of the 18th century. . .half boned stays. I was very interested to read about these on the Marquise site because they are made of an inner layer ("basis") that is boned and then the smooth outer layer and lining are attached so that in the final stays, the bone channels do not show. I decided I wanted to try this style since I didn't have to worry about hand stitching a whole set of stays (since anything visible must be handsewn) only to find out that they did not fit right, or had some other problem.

The pattern given on the marquise site called for stays with a front piece and back piece - that is it. Compared to the many pieces of my J.P. Ryan pattern for strapless, fully boned stays, this style seemed very simple. The problem was coming up with a pattern for it.


Stage 2: The Pattern

Ah, the pattern. Give me some measurements and I can whip up a mid 19th century style corset pattern in no time. 18th century style corset?

I tried. For weeks.

At first, I thought I would just drape a pattern on my own body. This did not work. I pinned a rectangle of fabric to myself (wearing a tight fitting cami) down the center front to mark the center front of the corset. I tried smoothly pinning the fabric to the contours of my body but got stuck when I reached the side, and it was impossible to drape upon my own back. The rather deformed looking pattern that resulted gave birth to a few dreadful mock ups, but that was all. I scrapped that.

I then thought I could tape the pieces of my JP Ryan strapless stays pattern together along the seam lines to get a complete shape for stays, and then divide the finished shape into two, to get a front and back. But the problem there was that the only size I have in the JP Ryan pattern is a size 10 and I have. . .ahem. . .grown some since when I first got this pattern. And the neckline shapes weren't right and I didn't know if the pattern would fit lengthwise anyway, even though I could alter the width if I had to.

Then I looked at Mara Riley's instructions again and noticed that she starts with a corset pattern made from the custom corset pattern generator and adapts that for 18th century stays. At first I did not want to do this since it seemed so. . .easy. . .and, well, aren't stays supposed to be hard?

But at last, I did. I entered in my measurements to a form on the computer and received instructions step by step on how to draw out a personalized corset pattern. It was free. It took maybe fifteen minutes. It was. . .easy.


Following Mara Riley's instructional photos, I altered the shape of the armpit area and hip area just a tad (making a more curved shape) and then I divided my finished corset pattern (half) into four shapes, making a front piece, a side front piece, a back side piece and a back piece. I drew in all my boning lines for where I wanted to place boning and also drew in the tabs. At last I had the beginnings of a workable pattern!I did not want to cut into this "master pattern" to use as my working pattern so I copied the shape and pieces and added seam allowances. Here is the new pattern newly traced onto brown paper, with the seam allowances. The center back edge has a 1" extension for the top layer of fabric of the stays, which is to fold over to the inside and finish the back edge for the last boning channel before I attach the lining and bind the whole thing. Otherwise all the other layers will be cut as normal. Here are the pattern pieces cut out and ready to go! I have been so blissfully content looking at my master pattern and traced working pattern that I have not yet started on the actual construction of these yet. I wanted to get started on them today, but anticipation is half the fun of creation, right? :)

Stage 3: Fabrics

I want to use fabrics I have on hand so as to make this project as inexpensive as possible.

The "basis" should be a strong and stiff linen canvas. I do not have linen canvas and can't really afford any right now, so I'm using cotton canvas instead. I don't really know if there is much difference between linen and cotton canvas, but I do know I've used cotton canvas as the interlining of a mid-19th century corset for my very well-endowed mother in law and it has held up very nicely, even though machine washings and dryings. So I hope it will work out all right for this style corset.

The outer fabric could be a silk, linen or wool. I have pink linen but don't really want a pink set of stays since I already have a pink mid-19th century corset. One should have some variety in one's wardrobe, you know. I looked through my wool and at first thought I'd use some black and silver wool/silk blend for the outer layer. But then I came across a smallish piece of plum colored wool that I had forgot I had - left over from a very long ago project with the scraps subsequently used for many different things. I folded the little piece of wool in half and laid the stays pattern on it and it just exactly fit. So it seems predestined. The plum wool will be my outer layer.

The lining will be of the pink linen. I also have some white linen but I think the pink will help tone down the harshness of the plum wool and add a cheerful, rosy color to it.

The binding will most likely be fabric binding cut on the straight. I am not sure what fabric I will use yet but I think I will have to buy something specifically for this. I want something very light yet strong so I think silk would be a good option. As for color, I would like a silver-blue or robins-egg-blue or apple-green. I'll have to go to the store and see what their selection is like.

Love,

Sarah

January 4, 2010


I was able to work on my stays a bit over the weekend. It was with fear and trembling I cut out the pattern pieces. I am making the basis first, so am only cutting out what I will sew up right away. I haven't cut out the wool outer layer or linen lining yet. I will do that as I come to them.

Stage 4: Making the Basis


I cut out 4 of each side back and side front pattern piece and two of each front and back (on the fold), to give me two complete whole layers of the finished corset pieces. The canvas I am using is so stiff that I used weights and traced around each pattern piece instead of pinning the pieces to the canvas. I tried pinning at first, but due to the stiffness of the fabric the pattern piece became distored when a pin was used. Here are all the pieces cut out. I cut each back piece and each front piece with the straight edge against the fold.The folded edge of the back pieces will be used as a back finish. All I will need to do is sew a line about 1/2" in from the edge, and this will create my back boning channel. The folded edge of the bodice front could work the same way if I wanted a front opening on these stays as well as a back opening. I don't plan on making a front opening, so I opened up each front piece and layed the two pieces on top of each other. I then sewed all the pieces together, treating the two layers as one. I am doing all this sewing by machine since this layer will be hidden betweenthe lining and the outer layer and there is no way anyone will ever see it unless they take apart my stays!Once I did that, I pressed all the seams towards the back. The Marquise 18th century stays instructions call for pressing the seams to one side since that strengthens the seam. However, some other costumers press the seams open and whip them down. I debated about what to do but in the end pressed the seams to one side. This DOES create a stronger seam. If you open up your seams, the stress is all on the threads connecting the two layers of the seam. I always press all my seams towards the side for almost all the historical (and even modern) garments I make. It just works so much better. I then basted around the neckline and the front lower curve on the stays so they would not stretch or distort. I marked all my boning channels, following the lines on my "master pattern" and sewed all the channels. I found I had to make my channels a little wider than I had originally thought since I hadn't taken into account the thickness of the boning material, just the width. Instead of a 3/8" channel I needed to make a 1/2" channel to allow the bone easy passage into the channel. Which brings us to: Stage 5: Boning Materials

In Costume in Detail, the half-boned stays described are boned with whalebone. Needless to say, whalebone is not available anymore as a corset stiffener. After reading lots of costume and corset-makers opinions, I decided a while ago to try cable ties as a corset stiffener and substitute for whalebone. The majority of the opinions I read said that cable ties have the same flexible properties as whalebone, flexing not only front to back but also side to side. Yet they are stiff and quite unbreakable. What's also nice is that they are locally available and relatively cheap. Since then, I've made a few corsets using the heavy duty cable ties in place of steel boning, including my current mid-19th century style corset. I really like how they have held up - even for my aforementioned well endowed mother in law - and they do conform a bit to my body shape, which makes them very comfortable. In extant examples of corsets, you can also find this curved shape which the whalebone takes on after you have worn it a while.

Here are the partially boned stays. I only had enough on hand to bone the front of the stays. I will need to pick up another package to finish out the rest. I think the total number of bones I'm using is thirty-two - by far the most bones I've ever used in any corset! To cut a bone, I slid a cable tie into the channel and clipped off the end to the length it needed to be. Next up is finishing the boning and cutting out the wool outer layer.

Love,

Sarah

January 7, 2010


I have been able to make some good progress on the stays so far this week. I was imagining them to take a long time to finish, but these seem to be working up pretty quickly, even with handsewing everything that can be seen from the inside layer or outside layer and even with having to do this sewing work in between naps and times of very short quietness for boys playing with legos and blocks and cars and Mr. Potato Head.

A few days ago, I finished the boning by inserting the rest of the boning into the sewn channels. For the horizontal front boning, I sewed on casings made of cotton twill tape and inserted the boning in those. At this point, I noticed the pressed-to-one-side seams were quite bulky and I did not think the seam allowances would be balanced by pressing the lightweight wool or linen lining seam allowances to the other side so I decided to press the seams open. It is much flatter now and works much better. I tacked down the seam allowances with a loose (rather sloppy)whipstitch in red silk thread just to hold them in place while I finished the rest of the layers. Stage 6: Making and Attaching the Outer ShellI then cut out one layer of wool and sewed the pieces together to make the outer shell. The back edges were cut 1.5" beyond the finished edge of the basis. I layed the wool layer on top of the basis and pinned it all around and folded the excess back width to the inside of the stays and whip stitched it down.I debated for a while about how to finish the back edge and was at first going to just bind it, but I read about this method of finishing the edge in my JP Ryan Strapless Stays pattern so I decided to try this since it seemed like less work. :P I then basted the wool layer all around with loose whip stitch in black cotton thread to the canvas basis and attached the wool layer to the basis at each seam by "stitching in the ditch". I detest stitching in the ditch. But I got the disagreeable task accomplished and moved on.

Stage 7: Making and Attaching the Lining


My next thing to do was to cut out the lining layer. It was cut out like the wool layer, but the back edge was cut on the normal line, not with an extension. I folded the seam allowances to the wrong side on each piece and pinned them to the basis, matching the seam lines. One by one I stitched the lining pieces to the basis. Here you can see most of the lining sewn in with just a little left to go:Once that was done I pinned the stays on my stuffed dressform to get an idea of how they would look. I am pretty happy with how they look so far! I need to steam shrink the wool layer to the basis since it stretched a little but otherwise so far so good!

Stage 8: Straps and Tabs

Last night I cut and sewed on the straps. They are made of layers of canvas, wool and linen just like the corset. I sewed the wool layer to the stays by laying it right sides together with the wool layer of the corset and sewing it to the "stub" that extends on the back corset piece. I then treated the canvas and linen as one and sewed it right sides together with the linen going along the same seam line. This method encases the seam allowance between the layers of the strap, so that no seam allowances are visible from either the inside or outside. I pinned the layers together and will later probably baste them together before I put the binding on. Last but not least I did what was the most tedious part so far - cutting the tabs. I laid out the stays on my work surface and marked the tabs with a fabric pencil. Then, one by one I cut out each tab. As soon as one tab was cut I quickly basted all the layers of the tab together with a closer whip stitch since I have dreadful fears of the tab layers shifting, stretching or fraying. Hopefully this will keep everything nicely in place until I get the binding put on.So that is where construction now stands! I need to cut the binding strips and start binding this thing and then lastly work the eyelets. . .For the binding I'm using some gold/brown changeable taffeta I found that I had forgot I had. I don't think it is real silk taffeta but for binding it should work fine. It is very sturdily woven and is light and is pretty and was very inexpensive, being bought as remnants at a thrift store. (3 yards for $1.50!) This has all in all been a very cheap project, using mostly stashed materials! The only expense so far has been the extra cable ties, which were $6 or so for a big package (and I only used about a quarter of them).

Hopefully we'll have finished stays by the weekend!

Love,
Sarah

1790's Transitional Stays

October 31, 2009

I have made several gowns from the excellent Elegant Lady's Closet Pattern from Sense and Sensibility. These gowns are in the style of early regency, and most appropriate for 1790's and very early 1800's impressions. My favorite is the "drawtring dress" which slips on over the head and the fit is adjusted with a drawstring at the waistline as well as the neckline. It is a pretty, easy to wear style and works well for maternity and nursing which is why I made a gown from this pattern in the first place!

I made a set of short stays a few years ago to get the proper "shelf" look of the regency era. While my first attempt did not come out badly, they no longer fit me correctly since the waist is now too loose and the bust much too small. (as my husband considerately noted, I might as well not make new clothes until I'm done bearing children since my shape changes with each new baby I have!) I wasn't overall pleased with the look of the short stays I made either. It gave a very high, rounded bustline which I felt rather self conscious about.

I decided to make some transitional stays in the style of these 1790s stays from Kent University:
Katherine has made a lovely reproduction set as well as my dear friend Lauren. Check out their work - it is lovely!

For my own set, I first spent a lot of time in thought about the project. I really did not think I'd get around to making my own set for a while, at least til the New Year. But I wore one of my drawstring gowns to church this past weekend and was extremely unhappy with my short stays. I just can't wear them anymore. So until I get a new set made I have to wear my gowns with a modern push up bra, which I hate and find very uncomfortable. These new stays suddenly hopped to top priority on my "to sew" list.

So, first of all I had to make a pattern. I started from scratch and took my own measurements, which is a tricky and difficult thing. I made two rectangles to start with. My goal was to make a fitted band which closely hugged my ribcage area all around, beneath my bustline in front and a bit higher in the back. Once that was done, I drew seamlines on my pieces, having a front, side front, side, side back and back piece. I cut away a cup shape on each front piece for each breast to lie in. This was a little tricky since the cup line had to snugly hug the outline of each breast, which was fitted mainly by trial and error.

Once that was done, I made a mockup. I had to take in a little from the center back seam and had to narrow the side back pieces by 1/4" on each side. Then the stays fitted very snugly. Since these will lace closed in the front I want them to bit a bit too snug to start with since I know they will stretch a little with wearing.

Using an outer layer of white cotton twill and an interfacing layer of white cotton I sewed all the pieces together right sides together and pressed the seams open. I treated the twill and cotton layers as one. I took this construction method from the instructions in the J.P. Ryan Strapless Stays pattern. After some of the construction is done a lining layer will be pinned and hand stitched to the inside of the stays to cover all the seam allowances.

Once that was done I sewed a bone channel at each seam line, except the center back seamline. I cut two longish oval shapes for the gathered cups and gathered them to the cut out cup areas and sewed them in. The original stays appear to be more gathered than mine are, but I think the lady who wore the original stays must have had a slighter figure than mine. I don't think I'll get much gathering at the top of the cups either. But so long as they fit and give the right shape I will not be overly picky.

That is all I have done so far. Here is what I have finished thus far:
Next I think I will sew in the lining. Then I have to make and attach the shoulder straps and all that is left is binding and making eyelets. These are going together much more quickly than I anticipated.

Love,

Sarah

November 3, 2009

Well my stays are nearing completion but I think it will still be a few days before I finish them. I'm not really looking forward to binding the tabs on the bottom. I love the look, but I hate binding scallopy things.

Since posting last I have sewn in the lining by hand but have had the worst time with the cups. I have decided I hate cups. I am completely in love with gussets in comparison. Why is it so hard to fit an individual . . .for lack of a better word. . .um. . .chest gland?

The first cups I made (as shown in the picture in my last post) held them up, but they were too tight in places making little ripply hills instead of a smooth mound. For lack of better adjectives. So I sliced into the existing cups and found I had to add about 2" in width to each one to make them fit the roundness without squishing it. So I did that. That gave me extra to gather at the top of the cups too, which I liked. I quickly did the eyelets so I could lace the thing up and see how it fit. While the gathered cups fit the breast quite well, they did nothing at all to support it. Major droop issues.

So I took those out. I made a new cup piece shaped similarly to the old ones but with plenty of room at the bottom of the cup but fitted straight across (no gathers) at the top of the cup. That seemed to work pretty well so I went with it.

So that is about where I am at right now. I sewed binding to the cup seam and also to the top of the stays. I also made and attached the shoulder straps. I have slip stitched half of the binding to the stays and tried them on earlier today and I think despite the problems I've had with the durn cups I'm going to really like these! They are extremely comfortable, they support but no do lift the bosom up so much that it forms a plate beneath ones chin. I tried on one of my drawstring dresses over them and I think they will work perfectly. They position the bust in a place which lets the waistline of the dress fall at a nice place, just below the bosom and I do not get any cleavage since the busts are seperated.
Next time, if/when I make this style again I think I will give myself some more room between the cups to get more of a seperate look. But then again, if I remain the same size I am afraid of getting a "wing" effect at the level of each armpit. Sigh. For now, I am very happy with the shape. But I am dreading binding those tabs! :)

Love,

Sarah

November 6, 2009

Well I finished the binding on the bottom this afternoon and it really wasn't as bad as I had thought. It took me longer to figure out how to apply the binding than it did to stitch it on.

The instructions in the J.P. Ryan stays says to pin the binding to the edge of the stays on both the right and the wrong sides, pulling the binding up between the tabs a bit.

I made my own binding from bias strips of twill. It was so bulky that pinning it did not work very well. I ended up stitching it with a half backstitch by hand to the right side of the corset and flipping it over and slip stitching it to the lining on the inside, while manipulating it around the curves by hand as I went. The binding looks bulky; I think next time I will use something much thinner and fine for the binding rather than bias strips of twill. But for a first attempt I am pretty satisfied.


All I need now is a good lace for this. The pink ribbon I've been using for try ons just is not the thing!

I'll try to get some pictures of it being worn within the next few days or so!

Love,

Sarah

1820's-1830's Corded Stays

October 5, 2009

I have at last decided that I am completely sick of modern clothing. I hate it, it doesn't last very long nor hold up to washing well. I also hate modern underclothes - they really don't last and they are just not comfortable! On the other hand, I love corsets. They are comfortable, fitted to onself and are very supportive - a bra, a back brace and a body shaper all in one! What can be more perfect? :)
So, deciding the above I have also decided to make a complete 1820's style wardrobe for myself for this fall/winter. To start with, I need some corded stays. Today I started a mock up for my first set. Once I make the first set I will see if I like them, if I need to adjust them, and then make a few more. I think for this set of clothes I will go more for the overall look of the period instead of sticking to strictly period construction techniques. I think I'll use my machine for nearly all of the construction. For a perfectly period garment, all seams should be sewn by hand. But since these will be for everday wear I'm not so concerned about being 100% historically accurate. Sturdiness and relatively fast construction takes precedence!
Pattern:
I have looked at all the extant 1820's-era stays I could find and have found rather diverse styles! I already have short stays that can work for 1820's style clothing but I find them more comfortable if I am pregnant and have a baby bump that can support the waistline of the short stays. Right now the waistline digs into my flesh. Not so comfortable! I am not currently pregnant and would like the added support of longer stays so I have decided to go with the longer style.
I really like the look of Past Patterns 1820's-1830's corded stays but do not really want to pay for a new pattern that I will have to alter to fit me anyway! I thought about sizing up the corded corset pattern from Katherine's Site but after a miserable failed attempt I pulled out my Mantua Maker Regency Corset pattern.
This pattern creates a raised bosom, tubular look so popular in the early 19th century. I first made a mockup of the unaltered regency pattern but decided the tubular look was not what I wanted. The 1820's were a time of transition and I wanted some more waist definition and I did not want my bosom right up under my chin! I am a bit busty, very short waisted and have larger hips. The tube thing just doesn't do it for me. I'd gladly give up some of my hip girth for a more slender line but after three babies that is just not going to happen!
So I altered this pattern by marking the point on each pattern piece where my waistline is. I am very short waisted so this line was pretty much just below the bust gussets and just above the hip gussets! I had to shorten each pattern piece between 2" and 1 1/2" to get the waistline to fall in the correct spot. I carved out a little curve at each waistline mark on each pattern piece, except for the center front. I lengthened the bust gussets to 6" in length so the bosom will not be pushed up so much. I also realized I need an extra 2" or so around the hips. I could have added another hip gusset to the seam between the back piece and side piece but instead I angled those seams out so the gusset will be cut as one with them, for ease of construction. Anything to get away from gussets! :)
I cut another mock up out from an old denim skirt. I added 1 and 1/2" to each back piece and sewed up the back seam, added 1/2" to the center front piece and cut two front pieces. When I tried on the mockup, I simply had to pin the front seam together. The 3" of "gap" (the area where the final corset will be laced) in the back was filled in by the extra I added to the back pattern pieces. This is a great way to fit a mock up of a corset and was taken from the fitting instructions in the Laughing Moon Victorian Corset pattern.
The final mock up fit wonderfully! I traced each pattern piece off onto fresh paper. Here are my altered pieces:Next step: Cutting out the "real" fabric and sewing up the shell and the lining. For that I plan to use gray cotton twill for the outer layer and a white striped cotton for the lining. Once the corset is corded I may fell in an additional lining layer but we'll see when the times comes!

Love,

Sarah
October 7, 2009

Yesterday I cut out my twill and cotton layers for my corded stays. After reading more about construction techniques, I decided I didn't really like the way the Mantua Maker pattern tells you to put your corset together. Sew all seams right sides together, press seams open, put lining and outer fabric wrong sides together and "stitch in the ditch" to attach them. I hate stitching in the ditch for anything, especially corsets. I knew there had to be a better way! Plus the construction technique sounded horribly modern. A pressed-open seam is not very strong.

So I went to Katherine's Dress Site again and read more about how she constructed her 1820's-1840's corded stays. The technique was intriguing. The seam allowances are pressed down, to the wrong side of the fabric, then the pieces are sewn together as close to the edge of the folded-down allowances as possible. This gives you more layers in the seam, thereby strengthening it, and forms a slight ridge on the wrong side of the seam. The outer seam looks like an ordinary one.

So I tried this technique on my twill stays. I loved it. It was quite firm and strong. But alas, when I went to measure the stays at the waist they came out 2.5" too short! I planned a finished waist measurement of 25" to allow for 3" of "gap" so I could lace to 28". (very doable, due to "squishable flesh"). But the measurement of the stays, with the back edges yet unfinished, measured only 23.5". I need another 1.5" just to bring them up to what I want my finished measurement to be, then another .5" on each raw back edge to turn under and sew to the lining before I do the eyelets. Sigh. I was very, very disappointed. I have no idea how this happened since I carefully measured before making the final pattern pieces but it doesn't really matter how it happened, just that it did.
So I made a cup of coffee and browsed some more online images of corsets, especially the ones from the Antique Corset Gallery. I got some good ideas for cording and decided there are a few things I want to change on my current pattern before I make the final stays, anyway. So my twill disaster was just really another great mock up.

I would really like to eliminate the hip gussets if possible. Adding them onto the existing pattern pieces worked great for the back hip gusset. I could even add the front hip gusset onto the existing side pattern piece. This would just give me one gusset towards the middle of the hip. Adding the gusset pieces on like this also gives my pattern pieces a shape similar to the corded stays on Katherine's Site. I am going to play around with the pattern today to see what I can do.

I won't be able to get into town to pick up more fabric for new stays until this weekend, so until then I will be trying to perfect my mock ups and pattern so the finished garment will be a breeze to put together! (hopefully!) :) I plan to get a few yards of cotton twill and some cotton sateen for lining. Hopefully that will be sturdy enough to hold up to everyday wear, yet light enough to be comfortable and easy to work in.

Now I'm pondering what to use for cording. . .
Love,
Sarah
October 14, 2009

Well, it has been about a week since I last updated. I went to Jo Anns over Columbus Day weekend and got some cotton twill on sale. The bolt I brought to the cutting counter had nearly 3 yards left on it; I wanted but two yards in two, one-yard pieces and one peice was almost a yard and the other piece was just a bit less than two. Because of that, the nice cutting-lady charged me 50% off the sale price - already at $3.99 - and gave me all the yardage as remnants! How cool is that?!

I cut out my stays from my fresh, altered pattern yesterday. I drafted in the front gusset as part of the side piece and it worked very well. I used a white striped cotton as the lining and just one layer of twill as the outer layer. I sewed the pieces together using a different technique than I did with my gray twill set last week. I first layed out the front lining, wrong side up, and placed the twill layer, wrong side down, on top of it. I then placed the side piece beneath the lining/fashion fabric piece (as if I were going to sew it to the front piece, lining to lining, right sides together) and then layed the twill piece on top of the front twill piece, right sides together. In the end, four layers (both the lining and fashion fabric front piece, and lining and fashion fabric side pieces) were sandwiched together. I sewed one seam, and there was the front and side pieces attached, and all seams nicely enclosed. This gives me a strong, four-layer seam and encloses all allowances at once. What could be better? This is a technique described by Carolann, a resident Expert, at the Sewing Academy in the context of mid-19th century corsets. I don't know if this technique was used on earlier corsets but it works well and is much quicker to do than other techniques. At the end, 1/4" on each raw edge of the back pieces was turned to the inside and the edges stitched together very close to the fold.

Today I had to stitch-in-the-ditch to connect the twill gussets with their linings. I hated that; it took me two hours to do six gussets!

Once that was done it was time to cord the stays. I had previously decided to cord and bone these stays since I really do need the extra support for a good shape. I made a set of corded stays pre-baby and even then, at a C cup size, the cords didn't support nearly so well as the bones in my 1860's corset did. Now, I'm bigger "up there" and want a good, supportive shape since I'll be wearing these for every day.

A major question for me was - were 1820's-1830's era stays ever boned? I had no idea. ..all the extant examples I've seen in pictures (maybe a dozen or so) didn't have any apparant boning. But out of the thousands of women who wore thousands of stays during that time period, surely someone used boning, right? I looked online and found a blog post someone wrote about a set of corded stays she made for herself that she ended up having to add boning to, since she was a curvier lady. Someone mentioned in that post an extant set of stays that had boning in them! So, 2nd hand documentation, sure, but it does seem to indicate boning was used!

So then I thought. . .why not just bone the durn things? I like the way cording looks but I don't have time now to hand sew cording channels and then thread cording through them. I need these stays soon. I could put in bones now, and if I needed or wanted to later, reinforce areas that need more support with corded channels.

So that is what I did. It took me about an hour this afternoon to mark and sew bone channels. Here is a picture of them so far. The channels are all sewn and bones are inserted into the (your) left side. . .I held them up to me and I think they will work very well. With this boning placement, the final stays will have twelve bones, although I may add an extra bone to each seam between the side/back pieces, giving me a total of fourteen bones. I did not leave an area for a busk, since I want these to be flexible and I never used a busk with my last set of corded stays. I do have channels for bone where the wood busk would have been, if I had chose to use it.

So all I really have left to do on these is finish putting in the boning, binding the top/bottom edges and working the eyelets. I need to get some laces too, but otherwise I should have these done by the end of the week!
Love,
Sarah

October 26, 2009

Well, so much for glorious notions of being a consistent keeper of a dress diary. It's been a while since I've updated!

Since I last posted, I finished the stays. Shortly after my last post I bound all the edges and made eyelets. I really liked how they looked once this was done. Here are some pictures from last week showing the front, back and side views of the stays and the shape they give.
Back: Side: As you can see I used 3 bones down the center of the stays instead of the more period correct busk pocket and busk. I did this because I figured I would never use a real busk and that more support there was better. I started making a dress to be worn over these stays and soon realized that I would have to make a modification down the center front. While the bones down the center front gave great tummy support they made an odd little ridge at the center front bust line. This line would usually be straightened by a straight busk, but the boning is not that stiff and bends to my form. It "cups" over my bosom and pokes up above the bust line - not a pretty sight when worn with a fitted dress!

So, I ended up undoing the binding at the center front top and I removed the 3 center bones. I sewed 3 lines of cotton cording down each side of a 1.25" space that will be my "busk pocket" (even though I will probably never wear a busk with this!) I used the bone channels as spaces for the cording, just sewing two lines down the center of each off-center bone. I then threaded the cords through with a big needle. The center bone channel is still intact but theoretically I can remove those stitches to leave the 1.25" wide opening for a busk if I decide someday I need to use one.
This took care of the pokey ridge problem. The corded center section cups my bosom but it gently curves and conforms rather that sticking up oddly! Problem solved! Whew! I think these are DONE now! :) Love,
Sarah